Rides on air.
A fully 3D-printed RC hovercraft with separate lift and thrust motors. It floats on its own air cushion and slides over asphalt, gravel, dirt and short grass.
Reserve one of the first ten numbered units with a 50% deposit, in the colours you pick. You pay the rest when your hovercraft is ready to ship.
Built to leave the floor
The lift fan fills a flexible skirt with air, so the hull never touches the ground. Loose stones, cracks and dry grass pass underneath.
Ten serial numbers. Then it's over.
The first ten reservations get serial numbers #001 to #010, printed into the hull, plus a founder card in the box with your name on it. Numbers go out in the order deposits arrive.
Founders pricing ends with unit #010. After that, the price goes up.
at founders price
Pick a build, then your colours
Prices in Canadian dollars. Founders pricing ends with unit #010, then the price goes up. The deposit is half the build price and the balance is paid before shipping. Extras are paid in full with your deposit. Every colour costs the same. No build includes a LiPo battery or charger.
Live colour preview on a photo of the original LEVITY. Real filament shades vary slightly. Want a colour that isn't here? Send a message after you reserve.
Extras are paid in full today and ship with your hovercraft.
Questions before you reserve?
Live colour preview on a photo of the original LEVITY. Real filament shades vary slightly.
Every part earns its place
Two motors do two jobs: one keeps the hull floating, the other pushes it forward. Twin rudders in the airflow do the steering.
Thrust duct
A 5.1″ three-blade prop inside a printed duct, with twin rudders right in its airflow.
Lift fan
A second brushless motor blows down into the skirt and lifts the whole craft.
TPU skirt
Printed in flexible TPU segments. It traps the air cushion and is easy to replace.
Air cushion
With the lift motor running, the skirt inflates and the hull glides over concrete.
Rudder linkage
One servo moves both rudders through a printed push rod.
Electronics bay
Wiring sits on a vented honeycomb deck beside the lift duct, with bullet connectors for quick service.
Photos and video: the original LEVITY prototype by its designer, MM_RC, used with permission. Founder units are built to the same design with equivalent components, in the colours you choose.
Battery and charger are not included
Every build ships without lithium batteries, so it can go anywhere by regular mail. Pick these up locally or online:
- Battery3S LiPo (11.1 V) with an XT60 connector
- Max size83 × 61 × 30 mm
- ChargerAny LiPo balance charger rated for 3S
Most standard 2200 mAh packs are around 105 mm long and won't fit; a 3S 1500 mAh does. Send a message before you buy and we'll confirm your battery fits.
83 × 61 × 30mm max battery
Battery shown for scale · not included
From deposit to doorstep
Reserve
Pick your build and colours, then pay 50% (plus any extras) to lock in a founder number. Numbers are assigned in the order deposits arrive.
We build
Production starts once five reservations are in. If we don't reach five by , every deposit is refunded in full.
Final check
Your hovercraft is printed in your colours, assembled and test-run. You get photos, then pay the remaining 50%.
Ships
Shipping starts , tracked, from Canada, with any extras in the same box. No lithium batteries inside, so it ships worldwide.
What's in the hull
| Lift | 2207 brushless motor, 5.1″ prop |
|---|---|
| Thrust | 2207 brushless motor, 5.1″ tri-blade prop |
| Speed control | Two brushless ESCs, one per motor |
| Steering | Servo-driven twin rudders |
| Stability | Gyro receiver in the Ready to Drive build |
| Skirt | Printed TPU, flexible and replaceable |
| Hull | Printed PLA |
| Power | 3S LiPo, XT60 (not included) |
| Best on | Pavement, gym floors, packed dirt, short grass. It floats on water, but it's built for land first. |
| Size and weight | About 450 × 250 × 190 mm · 1.1 to 1.2 kg with a battery |
Before you ask
Why a pre-order?
Each hovercraft takes about a day and a half to print, plus assembly and testing. Building to order keeps the price down and lets us number every unit.
What if not enough people reserve?
Production starts at five reservations. If we're short on the cutoff date, every deposit comes back to you in full.
Will the price go up?
Yes. Founders pricing covers units #001 to #010 only. Later batches will cost more.
Can I cancel?
Yes. Cancel any time before your unit goes into production and you get your full deposit back.
Can I choose other colours?
Yes. Pick from the colour schemes and skirt colours above, or send a message after you reserve if you have another combination in mind. Every colour costs the same.
Are the photos of my unit?
Not yet. They show the designer's original prototype, and the colour preview is a digital recolour of that photo. Your unit follows the same design with equivalent components, and you'll get photos of it before you pay the balance.
Which radio do I need for the Plug & Play build?
A surface radio with at least 3 channels, or an aircraft radio with 4 or more. You'll install your own receiver; we can help you wire it.
Is it a toy?
It's a hobby-grade RC with fast-spinning propellers. Recommended for ages 14 and up, with adult supervision for younger drivers.
LEVITY design by MM_RC, built under the official LEVITY commercial license. Photos and video by MM_RC, used with permission.
Questions about a reservation?